8
• The output of this unit is terminated internally. The high- impedance
such as 1 M
Ω
input impedance will be automatically selected on the
Infiniium, as the Terminator is plugged into the AutoProbe interface.
With an input impedance of 50
Ω
, accurate measurement is not
possible.
• The probe output sensitivity 0.1 V/A will be automatically selected, as
the Terminator is plugged into the AutoProbe interface. With an
different output sensitivity, accurate measurement is not possible.
NOTE
Summary of Contents for 1147A
Page 16: ...16 High Low Power Source Load Figure 5 Low voltage side of the ...
Page 23: ......
