Agilent Technologies 1147A, User Manual

Page: 4 / 24

4
Note on Safety
This equipment is designed according to IEC 61010- 1 Safety Standards,
and has been tested for safety prior to shipment. Incorrect measurement
procedures could result in injury or death, as well as damage to the
equipment. Please read this manual carefully and be sure that you
understand its contents before using the equipment. The manufacturer
disclaims all responsibility for any accident or injury except that resulting
due to defect in its product.
Safety Symbols
This User’s Guide provides information and warnings essential for
operating this equipment in a safe manner and for maintaining it in safe
operating condition. Before using this equipment, be sure to carefully
read the following safety notes.
The following symbols are used in this User’s Guide to indicate the relative
importance of cautions and warnings.
Caution refer to accompanying documents.
Indicates DC (Direct Current) or AC (Alternating
Current).
Indicates that incorrect operation presents extreme
danger of accident resulting in death or serious injury
to the user.
Indicates that incorrect operation presents significant
danger of accident resulting in death or serious injury
to the user.
Indicates that incorrect operation presents possibility
of injury to the user or damage to the equipment.
Denotes items of advice related to performance of the
equipment or to its correct operation.
WARNING
DANGER
WARNING
CAUTION
NOTE