AGILE 5250 ALLY, User Manual

Page: 198 / 240

AGILE 5250 ALLY User’s Guide and Reference Page B-16
If the current orientation is either portrait or landscape,
then the font selection process has two steps. First, one of
the following PFSs is sent to the target printer (in this
order of priority):
Orientation
PFS Condition
Portrait 13 — P PSCPI ps = 02h
Portrait 10 — P 5CPI CPI = 5
Portrait 11 — P 8CPI CPI = 8
Portrait 12 — P 10CPI CPI = 10
Portrait 15 — P 15CPI CPI = 15
Portrait 16 — P 16CPI CPI = 16
Portrait 17 — P 17CPI CPI = 17
Landscape 1B — L PSCPI ps = 02h
Landscape 18 — L 5CPI CPI = 5
Landscape 19 — L 8CPI CPI = 8
Landscape 1A — L 10CPI CPI = 10
Landscape 1D — L 15CPI CPI = 15
Landscape 1E — L 16CPI CPI = 16
Landscape 1F — L 17CPI CPI = 17
Next, the 5250 ALLY looks up the GFID in the font
correspondence table for the orientation (PP — PORT ID
or PL — LAND ID). If there is an entry for the requested
GFID, the corresponding PFS is sent to the printer to
select the font.
If there is no entry in the font table for the requested CPI,
or if the font selected by the PFS for the GFID is not
available at the target printer, then the target printer’s
spacing will still be correct because of the CPI PFS.
275EMUL: No operation.