22
31025 R0
1. Attach the lift arm mount to the lift arm mount brackets using six 1/2” x 1-1/2” bolts and locknuts.
2. Position the hopper lift arm assembly on the X-Tend hopper lift arm mount bracket with the arm
overhanging the side of the auger that the hopper will be operating on.
3. Fasten the hopper lift arm assembly to the mount bracket using five 1/2” x 1-1/2” bolts and locknuts.
Table 3.
Replacement Lift Arm
Standard Lift Arm
X-Tend Hopper Lift Arm (Replacement)
10-20030
10-22982
Figure 5.
X-Tend Hopper Lift Arm
1
3
4
2
3
4
2
Table 4.
Lift Arm Components
Item
Description
Part Number
1
Hopper Lift Arm Assembly
10–22982
2
X130 Lift Arm Mount
10–21769
3
Bolt, 1/2" x 1–1/2"
10–19589
4
Locknut, 1/2"
10–19599
4.3.2 Replace the Short Truss Brace
During the assembly of the auger, ensure that the standard single truss brace tube closest to the boot is
replaced by the short truss brace tube listed in
below.
X-TEND HOPPER – X130
