54
8210-00023 R0
Flighting shaft bolts are loose
or damaged.
Tighten or replace bolts.
Flighting shaft is bent.
Repair or replace flighting shaft.
Flighting is damaged.
Repair or replace flighting.
Worn bearing.
Repair or replace bearing.
Low gear oil level.
Inspect the gearbox, replace if damaged
or add oil if not damaged.
Tube is misaligned.
Loose truss cables.
Tighten cables as required.
Scissor Lift Frame/Undercarriage
Problem
Cause
Solution
Scissor lift not lifting
auger.
Ball valve on lift line closed.
Open ball valve.
Inadequate pressure from
source.
Use alternate hydraulic pressure source;
contact your local dealer for assistance.
The auger lifts slowly.
Inadequate hydraulic pressure
from source.
Use alternate hydraulic pressure source;
contact your local dealer for assistance.
If auger lowers faster than it
lifts, then the check valve may
be installed in opposite
direction.
Lower auger to transport position and
inspect check valve; re-install in opposite
direction if required (see indicator arrow
on valve).
The auger will lift but
not lower.
Foreign object clogging check
valve.
Contact your local dealer for assistance.
The auger will not stay
elevated.
Ball valve not closed while in
elevated position.
Close ball valve.
Leaking hydraulic hose or
fitting.
Lower auger to transport position and
repair leaks as required.
Leaking seal in hydraulic
cylinder.
Lower auger to transport position and
repair or replace winch.
The auger makes noise
while lifting.
Frame parts loose and move
while lifting.
Replace damaged components and re-
tension frame fasteners.
6300 SERIES – PORTABLE GRAIN AUGER
