21
!
Closing the housing ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Replacing the cover
- First hook in the cover at the top of the
housing. The three latches engage behind
the edge of the housing.
- Press onto the cover until it latches into
the housing at the bottom.
Locking the cover
- Insert the bolt with the hook facing
downwards in the cover opening, turning
the bolt slightly (Fig.14 ).
- Push the bolt past the pressure point in as
far as the stop (Fig. 15).
Locking the cover
Figure 14
Figure 15
- Pull out the black bolt slightly to the side
using a narrow srewdriver blade (about 2
mm wide) until you can grip the bolt
(Fig.16 and 17).
- hold the bolt and pull it right out turning
it slightly (Fig. 17 and 18).
You can use the bolt as a module extrac-
tor when exchanging a module.
Figure 16
Figure 17
The housing must be locked before you plug in the 230 V
mains plug of the telephone system.
Unlocking the cover ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
!
Before unlocking the cover, remove the 230 V mains plug
from the telephone system.
Figure 18
Unlocking the cover
