AGFEO basic-line plus AS 140 Installation Manual Download Page 13

1 - 13

As-delivered state

The followings settings are active in the 

as-

delivered state

:

- The switches S500 /S501 (termination for

the external S0 access) are closed and the
100 Ohm terminators are on.

- Line seizure: line seizure “0”
- Analog ports - internal phone numbers

(decade 1 set) and terminal types

AS 190

: 11 to 18,  telephone

AS 191

: 11 to 20,  telephone

AS 140

: 11 to 14,  telephone

AS 141

: 11 to 16,  telephone

- External access: unlimited for all users
- Call variant 1 (day): on, no internal phone

numbers entered, subscribers 11, 12 and
13 are called in the case of call

- Call variant 2 (night): off, no internal

phone number entered

- Call forwarding internal: off
- Number of calls: 5
- Don´t disturb: off for all terminals
- Knocking protection: off for terminals
- Transfer of phone numbers to the called

party and the caller: on

- Music on Hold (MoH): internal on
- Door call variant 1 (day): on, no internal

phone number entered, subscribers 11,
12 and 13 are called in the case of door
call

- Door call variant 2 (night): off, Printout of

dialed phone number: without

- Automatic dialing: off
- Printout of connection data set: off for all

users

- no internal phone number entered: ohne
- Cost limit: no entry
- Own tariff units factor: 0,12 DM
- Base factor (network operator factor):

0, 12 DM

- Cleardown at cost limit: off
- Setup code: off
- Cost code: no entry
- Switch box code: no entry
- Least Cost Router (LCR): off, for all sub-

scribers

- Busy on busy: off
-

AS 141, AS 191

: Transfer of “0” to dial

from call list at internal S0 port: off

AS 141, AS 191 with system telephone␣
ST 25

- Status display: off
- Cost display: off
- Display: German
- Call list: off

Summary of Contents for basic-line plus AS 140

















Reviews: