AGFEO AC 14 USB, Manual

Page: 55 / 76

P - 17 Programming
P
Enter system PIN?
If you hear the Acknowledgement tone after
*PRO
, the system PIN is switched off in the
telecommunications system. There is no need to
enter the system PIN.
If you do not hear any tone after
*PRO
, a
system PIN is programmed in the
telecommunications system. Enter the 4-digit
system PIN. You will hear the Acknowledgement
tone if the PIN is correct. If the PIN is incorrect,
you will hear the error tone (busy tone). Replace
the handset and start the input again from the
beginning.
h * A N L q ª
Lift
handset
Programming a system PIN
System pin Enter P P
P P
PIN ID and
4-digit system
PIN
Replace
handset Acknowledgement
tone
Protecting the programming mode and switch box against
unauthorised access
You can prevent unauthorised access to the
programming mode with a system PIN (
P ersonal
I dentity N umber).
You can prevent unauthorised access to the
switch box by a box PIN.
System PIN – Normally every subscriber can pro-
gram. With the 4-digit system PIN, you can
prevent unauthorised starting of the programming
mode. This protects your telecommunications
system settings (e.g. authorisation of the internal
subscribers) against unwanted changes.
Programming is only possible when the system
PIN has been entered after
*PRO
when the
programming mode is started.
You can switch the system PIN on or off or change
it. In the
as-delivered state , the system PIN is
always 2580 (standard PIN), this is the middle
keys from top to bottom. The standard PIN is
switched off.
You can enter your own new PIN for better
security.
The standard PIN or the new system PIN must be
switched on and off separately.
If you forget your own system PIN you cannot do
any more programming. In this case you will have
to consult your dealer. Only he can reset the PIN.
Box PIN – You can dial the switch box of your
telecommunications system en route from any
telephone, e.g. to switch over the day/night
service or set a diversion. You can protect the
switch box against unauthorised access with the
4-digit box PIN. No box PIN is programmed in the
as-delivered state . You have to enter a box PIN if
you want to use the switch box.
A
E
S
N
Selection
Pz
PRO
Start programming mode:
h
*PRO
q
ª
(system PIN)
Continue programming or exit programming mode:
h
*END
q
ª
END
Off
On
S
tandard PIN
Enter n n n n new PIN