66
67
Transmission
Connecting to a PC
You can connect to the PC by using the USB interface on
the camera or the USB cable. Once connected you can
manually transfer the files or use software such as Arcsoft
(included on disc).
Setting the USB mode
Since the camera’s USB port can be set to connect with
either a PC or a Printer, the following steps will allow you to
ensure that the camera is correctly configured to connect
with a PC.
1. Enter the camera setup menu and select USB Mode
with the UP/Down button, then press the
or the
Right button to enter.
2. Use the Up/Down navigation buttons to select PC.
3. Press the
button to confirm the setting.
Transferring files to your PC
The computer will automatically detect the camera as a
removable drive. Double click on My Computer (or Computer)
to access your computer drives. Locate the removable
drive, browse the directory to locate your files and copy the
folders/files as you normally do on a computer.
To use the Arcsoft software to transfer files to your
computer, please connect the camera to the computer and
follow these steps:
1. Start a computer to which ArcSoft software has been
installed.
2. Make sure both the camera and PC are turned on.
3. Connect the camera with PC:
• Connect USB interface of the camera with PC;
• connect one end of attached USB cable with the
camera, and connect another end with PC.
Summary of Contents for Optima 147
Page 1: ...User Manual OPTIMA 147 ...