Note:
Complete any alterations or reconfigurations of the SCSI chain before disabling the changer. If the
changer is disabled first and then the SCSI chain is reconfigured or altered, the Windows Device
Manager automatically re-enables any disabled devices. If the SCSI chain must be altered or
reconfigured, after the changes are complete, restart the computer and use the Windows Device
Manager to disable the changer again.
For more information on the Device Manager and disabling devices, refer to the Microsoft online help.
Enabling auto play
Autoplay should be enabled by default. However, if it is not, you must enable it to avoid problems
between IMPAX and archive devices.
1. Select
Start
>
Run
.
2. In the
Open
field, type
regedit
and click
OK
.
3. In the Registry Editor dialog, expand
HKEY_LOCAL_MACHINE
>
SYSTEM
>
CurrentControlSet
>
Services
and select
Cdrom
.
4. Ensure that the value of AutoRun is 1. If it is not, change the value to
1
.
5. Close the Registry Editor dialog.
6. To run the Group Policy Management Console, select
Start
>
Run
.
7. In the
Open
field, type
gpedit.msc
and click
OK
.
8. In the Group Policy dialog, expand
Computer Configuration
>
Administrative Templates
.
9. Click
System
.
10. Double-click
Turn off Autoplay
.
11. Ensure that the
Not Configured
option is selected.
12. Close the Group Policy dialog.
13. If you made any changes in the registry or Group Management Console, restart the computer.
Continuing the upgrade
17.
You can now proceed to install the hardware and software on the new Database Server. Refer to
Installing hardware and software on an AS300 server
(refer to page 26).
IMPAX 6.3 AS300 Installation Guide
77
