2.
Click
Transfer Images
.
The Transfer Images wizard opens.
3.
In the
Image Overview
pane, select the image.
The image is displayed in the wizard.
4.
Click
Continue
.
5.
In the
Worklist
window, select the examination with the correct
patient data.
The patient data is displayed in the wizard.
6.
Click
Continue
.
A transfer overview is displayed to check if all information is
correct.
7.
Click
Finish
.
The recovery image is transferred to the examination.
11.
Repeat steps 8 to 10, until all recovery images are assigned to the right
patient and have the correct image settings applied.
12.
Clean up the empty recovery examinations.
Repeat following steps for all remaining empty recovery examinations.
a) Double click an empty recovery examination in the worklist or select it
from the drop-down list in the title bar.
The
Add Image
window appears.
b) Click
OK
.
c) Click
Close and Send All
.
13.
Close the examinations that contain the acquired images.
Open the examinations one by one. Perform quality control. If all images
in the examination are OK, click
Close and Send All
.
Recovery examinations appear as open examinations. If the maximum
number of open examinations is exceeded, transferring a recovery image to a
worklist entry will fail. To solve this, first close the recovery examinations
(click
Close and Send All
in the Examination window). The examinations can
now be opened one by one from the
Closed Exams
list.
Depending on the configuration, editing patient data may be prohibited. If
patient data is not available from the RIS, manually create new examinations
in the worklist for each patient, into which the images from the offline
workflow can be transferred.
The DR detector is still set up for offline imaging. If an exposure is made, a
new recovery image may arrive. To end offline imaging, open an examination
with an empty thumbnail that is configured for that detector and click the
thumbnail.
XD 17, XD
⁺
17 | Getting started |
89
0434A EN 20210426 1355
