AGFA Drystar 5300, Reference Manual

Page: 8 / 210

8
2920B EN 20031206
Safety precautions
"
The Drystar 5300 must only be operated according to its specifications
and its intended use. Any operation not corresponding to the
specifications or intended use may result in hazards, which in turn may
lead to serious injuries or fatal accidents (for example electric shocks).
AGFA will not assume any liability whatsoever in these cases.
"
All images created using any image technology can show artifacts which
could be mixed up with diagnostic relevant information. If there is any
doubt that the diagnostic information could not be absolutely true,
additional investigations must be performed to get a clear diagnostic.
When operating or maintaining the Drystar 5300, always observe the
following safety guidelines:
•
Have electrical or mechanical defects repaired by qualified personnel only!
•
Do not override or disconnect the integrated safety features.
•
Ventilation openings should not be covered.
•
Always switch off the Drystar 5300 and disconnect the power cord from the
outlet before carrying out any maintenance work.
"
Film jam removal or cleaning the printer thermal head can be done
without switching the power off. Nevertheless, care should be taken and
the following instructions should be respected: