AGCO Glencoe CP40 CULTIPACKER, Operator'S Manual

Page: 21 / 36

ASSEMBLY
LIGHT KIT ASSEMBLY
12’, 14’ and 16’ Machines
Tail Lights
Position the tail light brackets and lights (red) on the
main bar symmetrically between 2 feet to 5 feet of
the centerline of the machine.
Be sure the lights can be seen from the rear.
Flasher Lights
Position the flasher lights (amber) on the main frame
within 16" of the outer most extremities of the
machine.
Be sure the lights can be seen from the front and the
rear.
Wire Harness
Fasten wire harness to the frame members using
nylon ties. Be sure the wires are not kinked or
stretched and do not rub against sharp edges.
Check for proper clearance when the machine is in
the raised and lowered positions.
Route harness along the tongue towards the tractor.
Allow adequate harness length to connect to tractor.
Final harness length adjustments can be made prior
to operation.
Be sure all lights work properly.
17