AGCO Glencoe CP40 CULTIPACKER, Operator'S Manual

Page: 16 / 36

TRANSPORT & STORAGE
TRANSPORT
Warning! Comply with your state and local laws
governing highway safety, lighting &
marking, and the movement of farm
machinery on public roads.
• The minimum weight of the towing vehicle
should be at least equal in weight of the towed
implement.
• Utilize transport chains. The transport chain
should be adjusted so that the tongue of the
towed machine will not touch the ground in the
event the hitch pin is lost or breaks.
• Use approved extremity lighting and warning
devices to warn operators of other vehicles on
the highway during transport.
• Make sure the light harness is properly
connected and all the lights are visible and
working.
• Turn on flashing warning lights before driving
on public roads, except when prohibited by law.
• Make sure reflectors are visible when
transporting.
• Use a SMV (Slow Moving Vehicle) emblem at all
times.
• Always drive at a reasonable speed to maintain
control of the equipment. Do not tow at speeds
in excess of 15 mph.
• Drive carefully. Plan your route to avoid heavy
traffic and restrictions. Measure overall
transport height and width to assure clearance.
• Be a safe and courteous operator.
Remove the transport lock (A) from storage position
and install on the wheel hydraulic cylinder rod as
shown (B).
Prior to transporting the unit always check wheel lug
bolt tightness. Lug bolts should be tightened to the
proper torque. Make sure tires are properly inflated.
Never transport implement with the tractor drawbar
free to swing. The tractor drawbar should be locked
in the center position for road transport.
12
GNC0078
GNC0076
A
B