![AGCO Gleaner DynaFlex 9250 Service Manual Download Page 14](http://html1.mh-extra.com/html/agco/gleaner-dynaflex-9250/gleaner-dynaflex-9250_service-manual_2866409014.webp)
79034308 B Rev.
01-11
Safety
FIG. 20:
Use extra care and reduce speed when
operating on hillsides or near ditches or embankments
especially with a full grain tank to avoid rollover. Travel
speed must be such that complete control and machine
stability is maintained at all time. Shift to a lower gear
before descending a steep hill.
FIG. 21:
Always shut off the engine, shift the
transmission to neutral, set the parking brake and remove
the start key before leaving the operator's station or
before permitting anyone to inspect, clean, lubricate,
adjust or repair any part of the machine or attachments
unless specifically instructed otherwise in this manual.
Never leave the machine unattended while the engine is
operating.
FIG. 22:
Never permit anyone to work under the header
or the feeder house, unless the stop is properly engaged
on the header lift cylinder, the engine is stopped, the
parking brake is set, and the start key is removed from the
start switch.
FIG. 23:
Always stop the engine before refueling. Do not
smoke while refueling.
FIG. 20
Wc1937a
FIG. 21
Wc1958
FIG. 22
Wc1954
FIG. 23
Wc1959