AGCO FENDT 800 Vario SCR Series, Workshop Service Manual

Page: 27 / 51

832 .. 1001-
833 .. 1001-
834 .. 1001-
835 .. 1001-
836 .. 1001-
28
T006019
Version 2
01-03-2011
0000 - Overall system/tractor
Technical data
Crop_this_page
Lubrication pressure at 2000 rpm engine speed (measuring
point SM) bar 4.7 ± 0.5
Transmission pressures with transmission oil temperature
greater than 80 °C
N
OTE
:
See also Workshop Manual (Chapter 1005 Reg. E –
Measuring transmission pressure)
Servo pressure at 2000 rpm engine speed (measuring point
PU) bar 28 +5
System pressure at 2000 rpm engine speed (measuring point
P) bar 27 +5
Feed pressure at 2000 rpm engine speed (measuring point ES) bar 24 ± 2.5
Outlet pressure at 2000 rpm engine speed (measuring point
AS) bar 15.5 ±2.5
Lubrication pressure at 2000 rpm engine speed (measuring
point SM) bar 4.7 ± 0.5
Tightening torques:
"Forward" high-pressure valve (2V3) Nm 250 +20
"Reverse" high-pressure valve (2V4) Nm 250 +20
Flushing or "discharge" valve (2V5) Nm 250 +20
Vario insert support shaft, M20 nuts (on both sides) Nm 250
Securing bolts on the Vario insert support shaft Nm 86
PTO drive fixing bolts
(cover on the planetary carrier) Nm 25
Fixing bolts for the transmission control unit (A009) Nm 25
Locating screw for the actuator shaft Nm 25
Valve block for transmission control system (tighten the
screws in the specified sequence) Nm 25
Vario: continuously variable transmission
Clutch (hydraulically actuated)
Medium - Pentosin
(X902.011.622.000)
Capacity l 0.25
Tightening torque for clutch pressure-limiting valve (4V5) Nm 100 +10
4WD
Clutch - Wet multiple disc clutch
Clutch actuation - electro. / hydraulic
Clutch pressure:
Clutch disengaged
bar 25 + 2.0
Clutch engaged (Belleville spring force) bar 0