832 .. 1001-
833 .. 1001-
834 .. 1001-
835 .. 1001-
836 .. 1001-
11
T003503
Version 5
09-09-2013
0000 - Overall system/tractor
A - General
Crop_this_page
2
Notes on documentation
To ensure that the information is structured in a user-friendly manner, the service documentation is divided
into the operator's manual and the workshop manual.
The operator's manual includes a general description as well as instructions for all necessary maintenance
work.
Knowledge of the owner's manual is essential to understand the workshop manual. This is particularly im-
portant for safety instructions.
The workshop manual describes repairs to assemblies and components, which will require more effort and
suitably qualified specialists to carry out.
Note
This workshop manual provides notes for trained technicians to maintain our tractors.
Read and observe the information in this documentation. This will help you prevent accidents and safeguard
the manufacturer's warranty.
The respective accident prevention rules as well as other generally recognised safety and occupational health
rules must be observed.
The tractor is built solely for the purpose defined by the implement manufacturer (intended use). Any other
type of use is considered unauthorised. The manufacturer bears no liability for any damage resulting from
improper use. The user bears this risk alone. Intended use includes maintaining operating, service and main-
tenance conditions as specified by the manufacturer.
Operation, maintenance and repair of the tractor may only be carried out by people who are familiar with this
equipment and aware of the associated dangers. Ensure that this documentation is available to and under-
stood by everyone involved in operation, maintenance and repair. Not observing this documentation can lead
to faults, damage and personal injury, for which the manufacturer assumes no liability. The prerequisite for
the tractor being correctly serviced and maintained is the perfect condition and availability of all necessary
equipment, standard tools and general workshop equipment as well as special tools. The use of special tools
is restricted to where absolutely necessary, and are displayed both where they need to be used and in a sum-
mary at the end of the manual.
The machine must be maintained according to its proper use.
Always
replace parts with genuine FENDT
spare parts! When ordering parts, please provide the chassis number as per the most up-to-date spare parts
documentation.
Only parts approved by the manufacturer for that specific purpose may be used for any alterations. The man-
ufacturer will not accept liability for any damage resulting from unauthorised modifications to the tractor. Non-
compliance invalidates the warranty!
Workshops should also refer to documentation on maintenance work and technical data.
Once maintenance is complete, take a test drive to ensure the vehicle's correct operation and road safety.
We reserve the right to make design changes in light of technical developments.
Notes on repairs
The assembly/disassembly instructions shown correspond to the design status at the time the workshop
manual was drawn up.
Further technical development of the product and additions related to different versions may require alterna-
tive working processes that do not pose too many difficulties to trained and qualified specialists.
These assembly/disassembly instructions shall be invalidated upon issue of the next version of this docu-
ment.
