WARNING: WHEN SERVICING OR REPLACING GAS CARRYING COMPONENTS,
DISCONNECT GAS SUPPLY TO APPLIANCE AND AFTER COMPLETION CHECK
APPLIANCE FOR GAS SOUNDNESS.
WARNING: WHEN SERVICING OR REPLACING COMPONENTS. COMPLETELY ISOLATE
THE APPLIANCE FROM THE ELECTRIC SUPPLY AND BEFORE RECONNECTING, CHECK
FOR ELECTRICAL SAFETY.
A.
TO REMOVE HOTPLATE
1.
Isolate from electric supply.
2.
Remove pan supports and burner caps. (See Fig. 22)
3.
Remove burner fixing screws (14) and hotplate fixing nuts (8).
4.
Lift off burner fixing rings (6).
5.
Lift off hotplate castings in the following order: left hand, right hand and centre. (See Fig.
23).
NOTE:
Each hotplate casting has an earth lead. Each lead must be disconnected before
completely removing hotplate casting. (See Fig. 24).
6.
Re-assemble in reverse order.
51
Fig. 22
Fig. 23
DESN 512935
DESN 512393 A
Summary of Contents for SIX-FOUR Series
Page 19: ...Users Guide 19...
Page 22: ...22 Fig 10 DESN 512646 A...
