Setting the Automatic Cooking Control
SETTING A STOP TIME ONLY
1. Place the food on the correct shelves in the oven.
2. Press the
MODE
button repeatedly until the LED bar 3 flashes and then press the plus
+
button until the time at which
the cooking is to end. After 5 seconds the LED will stop flashing.
3. Set the oven temperature control. Cooking will start immediately.
4. At the end of the cooking time, a beep will sound and will continue for 2 minutes unless cancelled manually. This can
be cancelled by pressing any of the buttons.
5. Return the oven control knob to the
OFF
position.
To cancel any automatic programme, press the
MODE
button and then the minus
-
button until the display shows the time
of day. A signal will sound.
SETTING THE MINUTE TIMER
The minute timer can be set to time periods from 1 minute to 23.59 hours.
1. Press the
MODE
button repeatedly until the LED bar 1 flashes, above the sign. Set the required time by using the
plus
+
and minus
-
buttons. (
NOTE
: The LED bar 1 will disappear if the plus
+
and minus
-
buttons are not pressed
within 5 seconds. The setting will then have to be repeated).
2. The set time will now remain displayed, the LED bar will remain steady and the time will start to count down.
3. At the end of the set time, a beep will be heard (2 beeps every 2 seconds) and will continue sounding for 2 minutes
unless cancelled.
4. Press any of the buttons to stop the beep. The LED bar light will go out.
The minute timer can be used at any time, even if an automatic cooking programme has been set.
9