8
Setting the Automatic Cooking Control
DESN 514107
Fig. 6
This can be used to set an automatic cooking programme at pre-set times.
The maximum length of cooking programme which can be set is 23 hours and 59 minutes e.g. delay time + cooking time
= max - 23 hours 59 minutes.
Before setting a programme, check that the clock is telling the correct time of day, and have the following information to
hand:
l
the length of time the food needs to cook.
l
the time that the food is to finish cooking.
l
the oven control setting required.
TO SET AN AUTOMATIC COOKING PROGRAMME
The
STOP
time or cooking time can be entered first. Each setting will remain displayed for 5 seconds, before
changing back to displaying the time of day.
Example
The food needs 2 hours 30 mins at MARK 1 and is required to be ready by 18.00 hours.
1. Place the food on the correct shelves in the oven.
2. Check that the clock is telling the correct time of day.
3. Press the
MODE
button repeatedly until the LED bar 2 flashes and then press the plus
+
button until 2 hours 30 mins
is displayed. After 5 seconds the LED bar will stop flashing.
4. Press the
MODE
button repeatedly until the LED bar 3 flashes and then press the plus
+
button until 18.00 hours is
displayed. After 5 seconds the LED bar will stop flashing.
5. Set the oven control to MARK 1.
6. The time of day will remain displayed throughout the cooking programme.
7. When the cooking has finished, a beep will sound and continue for 2 minutes, unless cancelled manually.
8. To stop the beep manually, press any of the buttons.
9. Return the oven control knob to the OFF position.
Programmes can be changed at any time by pressing the appropriate buttons and the plus
+
and minus
-
buttons as
already described.
NOTE:
It is not possible to change/set the time of day whilst an automatic programme is taking place.
