4
Installing your Glide-out™ Broiler
Your new Glide-out™ Broiler kit consists of:-
Two sliding side rails.
A grill pan support frame with handle. And a new broiler pan and grid.
Fitting the parts
1
If you look closely at the
two telescopic sliding
side rails in the kit you
will see that they are
different – one fits on
the left hand side and
the other on the right
hand side.
2
This is the left hand side
slide rail.
"fish hook" shaped part
3
Open the broiler compartment door and
remove the old broiler pan.
Look in the broiler chamber. At the back is
the rear shelf and at each side is a thick wire
side support.
rear shelf
wire side supports
4
Pull the left hand side slide rail fully open and hold it with the ‘fish hook’ shaped part pointing
upwards.
Summary of Contents for Glide-out
Page 2: ...2...
