FITTING YOUR HOB INTO A WORKTOP
Check contents against checklist.
Follow instructions carefully. When using power tools always follow the manufacturers safety
requirements.
STEP 1
Cut hole into the worktop.
STEP 2
Position hob centrally into aperture ensuring seal is in position.
STEP 3
Using the three screws which run front to back at the sides of the hob unit fix the
clamping brackets to the unit.
STEP 4
Turn each tension screw until it makes contact with the worktop. Using a
screwdriver further tighten a maximum of one and a half turns. This should be
sufficient to compress the seal. Do not overtighten.
5
DESN 511716
DESN 511715
DESN 511714
305mm
405mm
10mm
10mm
10mm
10mm
View from underneath
