Handset can be wall mounted as described below.
-
Remove backplate from the rear of the Handset by sliding down with hand and away from the Handset (Fig. 12).
-
Select the site for the handset and use the backplate to mark the position of fixing holes.
-
Drill 6mm dia. holes with masonry drill for the rawplugs.
-
Use rawplugs and screws supplied to fix the backplate to the wall (Fig. 13).
-
Stick the round self adhesive label supplied to the inside of the backplate to cover the fixing screw heads.
-
Fit the Handset on to the backplate by locating the tag on to the slot in backplate as shown (Fig. 14).
AIMS HANDSET
Fig. 12
Fig. 14
Fig. 13
13
