11
SHELVING CONFIGURATION ML15WSG
Insert Wine Bottles
The five (5) pull-out shelves each hold four (4) bottles. See
Figure 13 for typical wine bottle spacing. Care should be
taken when storing extra tall bottles in the wine cradle at
the bottom of the compartment because they may prevent
the door from closing.
Loading Tips and Suggestions
The bottles on the top rack directly under the light will be
exposed to a slightly higher temperature when the light is
on. Position your wines accordingly and REMEMBER TO
TURN OFF THE LIGHT WHEN IT IS NO LONGER NEED-
ED.
Keep wines that you plan to use for everyday drinking and
entertaining on the front half of the racks where labels are
completely visible. Place wines for aging or longer term
storing in the rear.
Pull-out Racks
The five (5) pull-out wine racks may be pulled out approxi
-
mately seven (7) inches to facilitate adding or removing
bottles. DO NOT lean on or press down heavily on the
wine shelves. Doing so may damage the shelves and the
wine bottles stored on them. Pull the wine racks out gently
and carefully to minimize unsettling your wine collection.
Avoid pulling out more than one rack at any time to main-
tain stability.
Single Bottle Racks
The single level roll out racks allow you to easily view and
access your inventory without disturbing other bottles (see
Figure 15).
Figure 14
Figure 15
Front Bottles (Necks Facing Rear)
Rear Bottles (Necks Facing Front)
Figure 13
