11
LEVELING THE UNIT
Leveling the unit:
Unit MUST be installed level in all planes, on a floor that is
strong enough to support a fully loaded refrigerator/freezer.
See Figure 12.
This unit is equipped with front and rear rollers. Rollers will
aid during installation. Rear rollers are adjustable from the
front of the unit. Total adjustment is +
5
⁄
16
, -
5
⁄
16
. Turn adjust-
ing bolt with a
7
⁄
16
" wrench clockwise to raise cabinet and
counterclockwise to lower cabinet. See Figure 13.
Front leveling legs must be adjusted to the floor for leveling
and to prevent the unit from rolling during use. See
Figure 13.
NOTE
Figure 12
Figure 13
-Rear Roller Adjustment Bolt
(Use
7
⁄
16
open end wrench or
socket and ratchet)-
-Both front leveling legs must be
adjusted to floor after leveling
Front
leveling
leg-
