Figure 6
Hinge adapter bracket lo
-
cated on the top and bottom
of the door.
Remove top
hinge pin to re
-
move the door.
Door should be
parallel to top
and sides of
refrigerator.
9/32”
(7.1mm)
NOTE
HANDLE INSTALLATION AND DOOR ALIGNMENT
Handle Installation (Solid Door Models)
1. Remove the handle, (2) screws, and 5/32” allen wrench from
the bag shipped inside the cabinet.
2. Locate handle opposite the hinges and secure in place using
the (2) screws and the allen wrench. (See Figure 5).
Screws
Handle
Figure 5
Right hand hinged
door shown
Door Reversal
It is possible to reverse the door (change from right hand swing
to left hand swing or vice versa) if you wish. To do so it will be
necessary to order one of the service kits below.
Hinge Color
Door Color
Right Hand
Left Hand
Chrome
Black
42247595
42247599
Chrome
White
42247639
42247640
Black
Black
42247596
42247600
White
White
42247597
42247601
Stainless
Steel
Stainless
Steel
42247598
42247602
6
Door Alignment Procedure
The door should be parallel to the sides and top of the refrig
-
erator. If alignment is necessary the door may be adjusted by
loosening the 2 screws which secure the hinge adapter brackets
on the top and bottom of the door and adjusting the door side
to side. Use a 5/32” allen wrench for this procedure. (See Figure
6 below). When finished aligning the door, tighten the screws
securely.
For the door to close properly, it is necessary to maintain a
minimum space of 9/32” (7mm) between the door and cabinet
flange (See Figure 6). This space can be adjusted by adjusting the
top and bottom hinge adapter brackets.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
