AGA marvel 3CARM Installation & Operation Manual Download Page 16

FEATURES

3CARM Features

There are three full depth adjustable shelves for flexibility of con

-

tent storage.  The shelves can move up or down to accommodate 

various content sizes.  To adjust the shelves, simply lift up and pull 

forward.

6CARM and 8CARM Features

There are two adjustable shelves for flexibility of content storage.  

The shelves can move up or down to accommodate various con

-

tent sizes. The lower shelf pulls straight out.  The top shelf is fixed 

in place with plastic clips in the rear.

Door Shelves 6CARM and 8CARM

To maximize storage efficiency, three door shelves are included to 

store a variety of contents.

Bottom Shelf Bar 6CARM and 8CARM

A bottom shelf bar is included to prevent contents from falling 

forward.

6CADM Features

Flat door liner.

Two pull out shelves with safety stops.

One stationary shelf that can accommodate tall contents.

Probe Port

 (optional)

The optional probe port is a hole from the inside to the outside 

of the unit, which could be located on the top, side, or back of 

the unit.  After inserting your wires or probe, seal the hole tightly 

with caulk, putty, foam, etc. for proper operation.

Glass Door 

(optional)

The optional glass door gives you the ability to see your contents 

without opening the door.

Lock and Key 

(optional)

The optional lock and key allow you to lock and store contents to 

prevent others from tampering with it.

Product Temperature versus Air Temperature

Air temperature moves up  and  down  with  door  openings  and 

compressor run and off cycles.  Air has little thermal mass and 

therefore  changes  temperature  relatively  quickly  as  the  unit 

cycles on and off.  Stored products have much higher thermal 

mass so their temperatures change much slower.  While air tem

-

perature  may  change  5  to  10  degrees  C  between  run  and  off 

cycles, stored product temperature typically changes less than 2 

degrees C due to their thermal mass.  Always measure product 

temperature, not air temperature, to determine if the products 

being stored are at the proper temperature.

15

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for 3CARM























Reviews: