14
PRODUCT DESCRIPTION
1.4 Installing and Removing Table Stands
(optional)
To install table stands:
1
Ensure your display is powered off.
2
Spread a protective sheet on a flat surface.
3
Carefully place the display face-down on the protective
sheet.
4
Align the stand by the screw holes and then tighten the
supplied screws on both sides of the display.
Screws
Table stand
Longer portions
face the front
To remove table stands:
1
Power off the display.
2
Spread a protective sheet on a flat surface.
3
Carefully place the display face-down on the protective
sheet.
4
Remove screws using a screwdriver and place them in a
safe place for reuse.
Note:
♦
The longer side of the stand
should face the front of the
display.
