CHAPTER 3: USING THE LCD MONITOR
18
3.1 Turning on the Power
1. Connect the power to the LCD monitor. Refer to page 14.
2. Connect the wired OSD controller to the LCD monitor. Refer to page 16.
3. Press the key on the wired OSD controller to turn the LCD monitor on.
MENU
SELECT
Power Key
When the LCD monitor is turned on, press the key on the wired OSD controller to turn off the LCD
monitor.
Note:
The LCD monitor still consumes power as long as the power cord is connected to the power outlet.
Disconnect the power cord to completely cut off power.
3.2 Displaying the OSD Menu
Press the MENU key to open the OSD menu. Press the MENU key again to close the OSD menu.
For more information on adjusting settings, refer to
MENU
SELECT
Contrast
Brightness
H-Position
V-Position
Phase
Clock
Auto Adjust
<Select>=Enter, <▲,▼>=Move, <Menu>=Exit
50
80
50
50
14
50
Picture
Colour
OSD
System
MENU Key
Chapter 3: Using the LCD Monitor
