manualshive.com logo in svg

AG Neovo SX-17P Plus, User Manual

Share
Download
AG Neovo SX-17P Plus User Manual Download Page 24

24

ON SCREEN DISPLAY MENU

Note:

 Availability of some menu items depend on the input source signal. If the menu is not available, it is 

disabled and grayed out.

Operation

3

Select the submenu item.

B R I G H T N E S S

5 0

C O N T R A S T

5 0

B L A C K   L E V E L

5 0

E X I T

A D J U S T

S E L E C T

C O N T R A S T

1 2 8 0 x 1 0 2 4   6 0 H z

B R I G H T N E S S

C O L O U R   S E T T I N G

I M A G E   S E T T I N G

P I P   S E T T I N G

A N T I - B U R N - I N

O S D   S E T T I N G

A U D I O   S E T T I N G

O T H E R   S E T T I N G

A U T O   B R I G H T N E S S

I N P U T   S E L E C T

L A N G U A G E

I N F O R M A T I O N

The highlighted item with an orange arrow indicates the active 
submenu.

Touch the 

 or 

 buttons.

4

Adjust the settings.

Touch the 

 or  

 buttons.

5

Exit the submenu.

Touch 

 or 

 to return to the 

previous menu.

6

Close the OSD window.

Touch 

 or 

 again.

When settings are modified, all changes are saved when the user does the following:

•  Proceeds to the another menu.
•  Exits the OSD menu.
•  Waits for the OSD menu to disappear.

Summary of Contents for SX-17P Plus














































Reviews:

No comments

Brands by name

Popular brands

Load more brands