manualshive.com logo in svg

AG Neovo SX-17P Plus, User Manual

Share
Download
AG Neovo SX-17P Plus User Manual Download Page 19

19

USING THE LCD DISPLAY

3.3 Adjusting the Volume

1

 

Touch either the   or   buttons to call out the volume bar.

2

 

Touch the   button to increase volume.

 

Touch the   button to decrease volume.

 

To mute the audio, set the volume to 0.

VOLUME

 buttons

3.4 Locking the OSD Menu

Lock the OSD menu to protect the LCD display from unauthorised users or from accidentally pressing the 
keypad.

To lock the OSD, press and hold the keypad buttons listed below for at least 5 seconds or until the 

O S D
L O C K   O U T

 message appears.

When the OSD is locked, all keypad buttons are inactivated.

Type of OSD Lock

Lock Operation

Unlock Operation

Lock all buttons

Touch and hold the  , 

, and the 

 

buttons for 5 seconds.

Touch and hold the  , 

, and the 

 

buttons for 5 seconds or until the OSD 
menu appears.

Lock all buttons except 
the 

POWER

 button.

Touch and hold the  , 

, and the 

  

buttons for 5 seconds.

Touch and hold the  , 

, and the 

  

buttons for 5 seconds or until the OSD 
menu appears.

Summary of Contents for SX-17P Plus














































Reviews:

No comments

Brands by name

Popular brands

Load more brands