manualshive.com logo in svg

AG Neovo SX-15E, User Manual

Share
Download
AG Neovo SX-15E User Manual Download Page 38

38

ADJUSTING THE LCD DISPLAY

Item

Function

Operation

Range / 

Value

BLUE 
SCREEN

Enables or disables the blue screen feature. 
If the setting is set to 

ON

, it displays a blue 

screen when no signal is available

Touch the   or   button to 
select the setting.

ON

OFF

SIGNAL INFO

Enables or disables the signal information to 
be displayed on the screen

HDMI CEC

Enables or disables the HDMI CEC feature. 
If the setting is set to 

ON

, you can control the 

connected HDMI CEC-compatible device on 
the same power on or power off status.

Note:

 This menu option is only available if 

the input source is HDMI or DP.

LOGO

Enables or disables the logo feature. If the 
setting is set to 

ON

, the AG Neovo logo is 

briefly displayed after the display is powered 

on.

LED

Turns the LED indicator on or off while using 
the LCD monitor.

MONITOR-ID

Sets the monitor ID.

Touch the   or   button to 
set the ID.

-

RECALL

Recall

Use to recall all to default settings, except 

Language and the input source.

Touch the   button to 

execute the function.

System

Summary of Contents for SX-15E















































Reviews:

No comments

Brands by name

Popular brands

Load more brands