10
PRODUCT DESCRIPTION
1.2 Wall Mounting Installation Preparation
1.2.1 Wall Mounting
1 Remove the base stand.
See procedures below.
2 Wall mount the LCD display.
Screw the mounting bracket to the VESA holes at the rear of
the LCD display.
1.2.2 Removing the Base Stand
1
Carefully place the
product screen side
down on a cushioned
surface that will
protect product and
screen from damage.
2
Remove the screws
securing the base
stand from the LCD
display.
3
Detach the base
stand.
4
Lock the screws back.
Note:
Take measures to prevent the
LCD display from falling down
and lessen possible injury and
damage to the display in case of
earthquakes or other disasters.
♦
Use only the 75 x 75 mm and
100 x 100 mm wall mount kit
recommended by AG Neovo.
♦
Secure the LCD display on a
solid wall strong enough to bear
its weight.
Note:
To protect the glass panel, place a
towel or soft cloth before laying the
LCD display down.
Warning:
Ceiling mount or mount
on any other horizontal
surface overhead are not
advisable.
Installation in contravention of
the instructions may result in
undesirable consequences,
particularly hurting people and
damaging property. Users who
have already mounted the
display on the ceiling or any
other horizontal surface overhead
are strongly advised to contact
AG Neovo for consultations and
solutions to help ensure a most
pleasurable and fulfilling display
experience.
100mm
75mm
100mm
75mm
