46
ADJUSTING THE LCD DISPLAY
Item
Function
Operation
Range
POWER SAVING Enables or disables power saving mode.
Note:
The amount of time for the display
to enter power saving varies depending
on the “SOURCE DETECT” setting. If the
“SOURCE DETECT” is set to “AUTO”,
the display checks all input source signals
before entering power saving mode if
no signal is detected; this takes up more
time. If the “SOURCE DETECT” is set
to “MANUAL”, the display enters power
saving mode right away
Press AUTO on the
control panel or OK
on the remote control
repeatedly.
OFF
ON
SOURCE
DETECT
Sets the display to automatically or
manually detect the input source signal.
MANUAL
AUTO
BLUE SCREEN
If no input signal is available, the
background of the screen is blue.
OFF
ON
COLOUR
SYSTEM
Select the input signal system.
Note:
This menu item is only available if the
input source is CVBS.
Press AUTO on the
control panel or OK
on the remote control
repeatedly.
AUTO
PAL
PAL 60
NTSC
NTSC 443
SECAM
ANTI-BURN-IN
Protects the display from “burn-in” or
“afterimage” symptoms when the display
has not being used for a period of time.
SETTING
ANTI-BURN-IN
ON
4 HOURS
C
ENABLE
INTERVAL(HOURS)
MODE
Note:
When Anti-Burn-in
TM
starts, you will
see the following notification:
ANTI-BURN-IN BEGIN!
Press AUTO on the
control panel or OK on
the remote control.
-
