manualshive.com logo in svg

AG Neovo SC-32E, User Manual

Share
Download
AG Neovo SC-32E User Manual Download Page 11

11

PRODUCT DESCRIPTION

1.2.2    Adjusting the Tilt (for SC-32E/SC-42E)

For comfort viewing, tilt the LCD display up to an angle of -7° to 17°. Hold the stand with one hand and use 

the other to adjust the LCD display to the desired angle.

17°~-7°

1.2.3    Wall Mounting

To wall mount the LCD display, do the following steps:

1.  Remove the base stand.

Refer to page 53.

2.  Wall mount the LCD display.

Screw the mounting bracket to the VESA holes at the rear of the LCD display.

DVI

HDMI

USB

VGA

AUDIO  IN

CVBS

IN

OUT

100mm

100mm

Note: Take measures to prevent the LCD display from falling down and lessen possible injury and damage 

to the display in case of earthquakes or other disasters.

•  Use only the 100 x 100 mm wall mount kit recommended by AG Neovo. All 

AG Neovo wall mount kits comply with VESA standard.

•  Secure the LCD display on a solid wall strong enough to bear its weight.

•  It is suggested to wall mount the LCD display without tilting it facing 

downward.

Summary of Contents for SC-32E


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands