68
ADJUSTING THE LCD DISPLAY
Item
Function
Operation
Range
Anti-Burn-in
• Mode
: Set the Anti-Burn-in
mode.
Press the / button on the
control panel or the / button on the
remote control to select the setting.
Off
A
B
C
• Interval (HOURS)
: Set the
interval time in hours between
activating the Anti-Burn-in
function.
4
5
6
8
Alink
Enable or disable HDMI Consumer
Electronics Control control.
If the setting is set to
On
, you can
control the connected HDMI CEC-
compatible device on the same
power on or power off status.
Off
On
Advanced
Power
Management
Configure advanced power
settings.
• Power Saving Mode
: Enable
or disable power saving mode.
When the LCD display turns
into power saving mode, the
screen turns black and the LED
indicator lights amber.
Off
On
• Switch Power On State
:
Choose the display status used
for the next time you connect
the power cord.
On
Standby
Last Status
• Switch Power On Delay
Times
: Adjust the power-on
delaying time (in seconds)
allows a sequential powering-
on for each display by their ID
number when multiple displays
are connected.
Press the / button on the
control panel or the / button on the
remote control to adjust the value.
0 to 60
• Energy Saving
:
Choose Normal for PC wake up.
Press the / button on the
control panel or the / button on the
remote control to select the setting.
Normal
Low Power
Standby
• LED Indicator
: Set the LCD
monitor’s LED indicator on or off.
Off
On
Auto Brightness
Automatically adjust the screen
brightness according to the ambient
light.
Off
On
