77
ADJUSTING THE LCD DISPLAY
Item
Function
Operation
Range
Static IP
Configuration
Configure the network parameters,
such as IP address, netmask,
gateway, DNS 1, and DNS 2.
Note:
This function can be only
configured when the
Network
configuration
setting is set to
Static
IP
.
a) Press the / button on the
control panel or the / button on
the remote control to select the
item.
b) Then press the
INPUT
button
on the control panel or the
button on the remote control to
confirm the selection.
c) Press the / button on
the control panel or the /
button on the remote control if
necessary and then use the digit
numbers from [0] ~ [9] on the
remote control to configure the
network parameters.
d) When the setting is complete,
press the
INPUT
button on the
control panel or the
button.
Press the / button on the
control panel or the / button
on the remote control to select
Done
. Then press the
INPUT
button on the control panel or the
button on the remote control
to save the setting.
IP Address
Netmask
Gateway
DNS 1
DNS 2
Digital Media
Renderer -
DMR
Enable this function to allow the
display to receive multimedia files
from the connected device from the
network.
Press the / button on the
control panel or the / button on the
remote control to select the setting.
Off
On
Wake On LAN
Enable this feature to allow the
display to be switched on over the
network.
Press the / button on the
control panel or the / button on the
remote control to select the setting.
Off
On
