8
MAINTENANCE
FILTER MAINTENANCE
1. Unplug the unit.
2.
Slide the filter from the grille.
3.
Clean and wash the filters with warm water (no soap or cleaners). Gently shake the filter dry, then
reinsert it or store in dry and cool area in a sealed container.
4.
Replace filters if necessary.
COIL MAINTENANCE
Once per year, clean the coils with an approved coil cleaner. Coil cleaner should be a self-rinsing,
foaming cleaner such as WEB® Coil Cleaner.
PUMP MAINTENANCE
1. To access the pump, remove the screws on the housing, then lift off.
2. Unplug the pump drain line, then remove the screws holding the pump in place.
3. Once the screws are removed, lift off the top of the pump and set aside.
4. Use a paper towel to wipe out the base of the pump, then reassemble.
STORAGE
Clean the Machine Body
Use a soft, damp cloth to clean the exterior of the unit. Do not use any soap or solvents. Do not clean the
unit with water directly.
Organize the Power Cord and Drain Hose
1. Remove the drain hose from the drainage outlet of the machine.
2. Open the velcro on the hangers.
3. Hang the power cord and drain hose on the hangers and close the velcro.
Store the appliance in a dry and cool indoor place, away from direct sunlight as well as chemicals and
out of reach of children. Make sure the machine is levelly positioned. If you want to stack these units,
stack them on their tops with the same orientation. Do not stack more than three units.
If the unit will be stored for an extended period of time, complete the following steps:
1. Turn off the unit and allow it to dry.
2. Clean out the pump reservoir.
3. Wrap and secure the power cord and
4.
Cover filter mesh.
5. Store in a clean, dry space.
