© Copyright LOTRONIC 2016 COMET-FX
Page 7
SPEED Mode:
To adjust the speed of the automatic program and the sound active program.
1. Press <SPEED> on the IRC.
2. Press <+> or <–> to either increase or decrease the speed of the program.
SENSITIVITY Mode
To adjust sound sensitivity for in Sound-Active mode
1. Press <SENSITIVITY> on the IRC.
2. Press <+> or <–> to either increase or decrease sound sensitivity.
DMX Mode:
To enable DMX or disallow DMX on the product
Manual Mode:
To manually control the RGB percentage:
1. Press <MANUAL> on the IRC.
2. Press <R>, <G>, or <B> (red, green or blue) to choose your color.
Number 1~9
To adjust the brightness value of the automatic program, the sound active program and
Manual Mode.
1. Press digit <1> to <9> to change different brightness on the device.
UNIT Mode
1. Press <
UNIT
> on the IRC.
2. Press<1> On / Off laser.
Cleaning and Using Frequency of Product
CAUTION
: Disconnect from mains before starting maintenance operation!
It’s suggested to use the high quality, professional glass detergent and soft cloth to clean the light. It’s not allowed to
use alcohol or chemical solvent. When the light doesn’t work, please check if the fuse is burnt out or not. If it is, the
same fuse should be replaced, find out the faulty and restart the light. But please note the repair must be handled by
professional.
TECHNICAL SPECIFICATIONS
Channels: .......................................................................................... 4 or 9 DMX Channels
Control mode: ................... Sound activated, Auto, Master/ Slave, DMX and remote control
LED power: ...................................................................................... 25 x 1W RGBAW LEDs
.................................................................... 12 x 1W white SMD led (for strobe)
Laser: ......................................................................................... Red 80mW + Green 40mW
Fuse .................................................................................................................................. 3A
Working environment: .......................................................................... indoor, 20°C – 40°C
Voltage: ................................................................................... AC 100-240V ±10% 50-60Hz
Rated power:.................................................................................................................. 80W
Dimensions: ........................................................................................... 355 x 340 x 280mm
N.W .............................................................................................................................. 3.8Kg
Electric products must not be put into household waste. Please bring them to a recycling centre.
Ask your local authorities or your dealer about the way to proceed.