background image

© Copyright LOTRONIC 2018                                       

Page  3 

tank. Close the tank immediately after filling it. 

  It’s forbidden to spray directly towards persons. Keep far away from flammable and explosive objects 

  If the machine doesn’t work, please check if the fuse is burnt. If it is, replace it by an identical fuse, find out the 

fault and restart the machine. But please note: all repairs must be handled by a professional. 

  The unit generates fog that stays on the ground. After a long use, the floor gets wet. Please make sure that the 

floor can't become slippery. 

  The unit is an environmental friendly low fog machine that doesn't use dry ice. However, the fog blows away very 

easily. Please pay attention to the influence of a fan and air condition. 

  Please drain all water in the tanks before transporting the machine. Discharge the fluid in the fluid tank. 

  Don't shut down the machine during fog output as this will block the inner atomization pipe. 

  Never drink fog liquid. If it is ingested accidentally, call immediately a doctor. If liquid gets in contact with skin or 

eyes, rinse thoroughly with water. 

 

Important note: The higher the ambient temperature, the better will be the effect. The fog is not visible in a 

cold environment! 

 

Product description 

The Water-Fog Machine creates a continuous,  spooky,  low-lying fog that  covers  the floor and dissipates without 

rising. The Ultrasonic technology eliminates the need for dry ice that is replaced by distilled or pure water, which is 

safer  for  the  environment and cost saving.  You don't have to deal with the hazards of dry ice anymore. Output 

volume, interval and duration are adjustable. The unit is perfect for small clubs, small stage productions and family 

parties. 

 

Features 

1. Compact size, only 27kg, for ease of transport 

2. Long-lasting housing with anti-corrosive primer, lightweight, portable and durable 

3. Fluid tank and water tank comes with drain hole to prevent leakage upon transportation; 

4. Advanced No-fluid protection; 

5. Built-in LCD control, 3pin and 5pin DMX connectors;   

6. Clear fluid level display; 

7. Please use AFX professional fluid PROSMOKE5L-LOW; a different fluid will alter the stage effect. AFX fog fluid 

provides an awesome quick dissipation effect. 

 

Description of the parts 

1.  Spraying nozzle 

2.  Hose 

3.  Nose 

4.  Fluid level indicator 

5.  Spin lock 

6.  Water tank 1 

7.  Fluid tank 

8.  Fan 

9.  LCD 

10.  Overload protection 

11.  5-pin DMX connector 

12.  Power switch 

13.  3-pin DMX connector 

Summary of Contents for 15-1746

















Reviews: