6.
Using a seal/bearing punch (available at most automotive stores/harbor freight) firmly press the filter media to
ensure a tight packing in case pack was disrupted during the shipping process.
*** Important! Do not skip this step. Failure to pack will cause channeling which could result in poor filter
performance and possible filter paper rupture. ****
Installation
7.
a.
For internal systems
provided by the OEM attach the filter housing to the flange using the 2.5” tri-
clamp. The filter cartridge itself acts as the gasket. Tighten bolts to
10ft/lbs.
Place entire assembly back into column and follow reassembly procedures per manufacturers’
instructions.
b.
For external systems
running inline, assemble the base of the filter housing by installing the 2.5” -> 1.5”
reducer using a gasket and clamp. The base of the filter housing is the side closest to the screen plate.
Tighten bolts to 4ft/lbs.
