Series AFS6322
Alba Fiber Systems Inc. Specifications are subject to change without notice. Page 7 11/21/13
www.albafiber.net [email protected]
4 Ports Modular 10/100BaseT(X) to 100BaseFX Ethernet/Fiber Switch
2 x 10/100BaseT(X) Ports, 2 x 100M SFP Port
5.0 Installation
The ALBA FIBER SYSTEMS Series AFS6322 products are interchangeable between Standalone
and Rackmount. Cards units occupy one slot in Alba’s standard 19"x4U chassis series AFS945-1
with one power supply (total 15 cards) or ASF945-2 with 2 power supplies. To install card and
power supply, keep the orientation of Alba logo on top and slide onto the top and bottom card
guides in the chassis. Press securely on the top and bottom of the card to ensure that it is fully
seated so that the electrical connector mates with the chassis-mounted motherboard. Once
installed, manually tighten the two thumbscrews located at the top and bottom of the card. Do
not use tools to secure these and do not over tighten.
6.0 Product Signal Format & Specifications
The tables below identify the specifications for the various signals that these fiber switches.
.
CONNECTORS
Optical
SC or LC (SFP)
Power
Terminal Block
Ethernet
2 x RJ-45
OPTICAL PARAMETERS
Fiber
SFP Dependent
Wavelengths (MM)
850/1310nm
Wavelengths (SM)
1310/1550nm
DATA
Data Interface
2 x 10/100BaseT(X)
RJ-45 ports
Data Rate
10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical
Port / Full Duplex Optical Port
