background image

 
 

Series AFS6322

 

 

 

Alba Fiber Systems Inc.  Specifications are subject to change without notice. Page 11  

11/21/13 

 

www.albafiber.net                                                                                            [email protected]

 

4 Ports Modular 10/100BaseT(X) to 100BaseFX Ethernet/Fiber Switch 

2 x 10/100BaseT(X) Ports, 2 x 100M SFP Port

 

 

 
10.0 Warranty 

 

 3 years warranty for product - please refer to Alba Fiber Systems warranty document. 

 Repair 

If  product  is  found  to  be  defective,  and  user  must  contact  a  local  distributors  or  re-

seller.    In  order  to  return  any  items  for  repair  or  credit,  buyer  must  receive  a  dated  Return 
Materials  Authorization  form  (RMA  #),  assigned  by  Alba  Fiber  Systems  Customer  Service 
department. Please contact 

[email protected]

.

  Returns must be shipped prepaid, fully insured, 

door  to  door  service  and  clearly  identified  with  RMA  on  package  exterior  or  it  will  not  be 
accepted.    Alba  reserves  the  right  to  apply  repair  charges  to  any  products  that  have  been 
dismantled or modified by anyone other than an Authorized Alba Security engineer. 



Please attach a statement clearly describing the problem. 

 Alba will repair defective product under warranty free of charge to our customers. 

 Any unauthorized modification of hardware and software voids the warranty. 



Warranty does not cover mishandling and/or abuse of the product.

 

 

Products  comply  with  the  following  Safety  Label  for  International  Fiber  Communication 
Equipment. 
 
 
 

 

 
 

 
 

 

 
 

 
 

 

 

NOTE: This equipment has been tested and found to comply with the limits for 

a Class Adigital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed  to  provide  reasonable  protection  against  harmful  interference  when 
the  equipment  is  operated  in  acommercial  environment.  This  equipment 

generates uses and can radiate radiofrequency energy and, if not installed and 
used  in  accordance  with  the  instructionmanual,  may  cause  harmful 

Interference  to  radio  communications.  Operation  of  thisequipment  in  a 

residential  area  is  likely  to  cause  harmful  interference  in  which  case  theuser 
will be required to correct the interference at this own expense. 

Alba Fiber Systems 

265 E. Merrick Rd. 
Valley Stream, NY 11580, USA 

 
www.albafiber.net 

Summary of Contents for AFS6322 series












Reviews: