9
Mounting
EN
WaterSensor con
5
Mounting
If you intend to mount multiple products, start by creating a mounting plan
with the appropriate mounting locations. Then label the products with
numbers or the corresponding mounting location to help avoid confusion
of mounting locations.
5.1
Preparing mounting
Prior to mounting, verify that the solar-operated energy storage module
has been charged.
- Regular daylight is sufficient for charging the energy storage module.
- Exposure to direct sunlight reduces the charging time.
5.2
Mounting the product
If you intend to mount multiple products, start by creating a mounting plan
with the appropriate mounting locations. Then label the products with
numbers or the corresponding mounting location to help avoid confusion
of mounting locations.
1. Use a battery in darker environments.
2. Position the product as close as possible to a location where water may
leak.
3. Take into account the gradient of the floor and the possible direction of
flow of the leaking water.
4. Remove water absorbing materials on the floor, for example carpets.
CAUTION
WRONG PRODUCT POSITIONING
Only place the product on floor spaces that persons cannot enter.
Failure to follow these instructions can result in injury or equipment dam-
age.
Summary of Contents for WaterSensor con
Page 16: ......
