12
Maintenance
EN
KSG Magnum
6
Maintenance
6.1
Maintenance intervals
Refer to the operating instructions of the diaphragm safety valve.
7
Troubleshooting
Any malfunctions that cannot be removed by means of the measures
described in this chapter may only be repaired by the manufacturer or by
qualified persons.
When
Activity
Every six months
Perform a visual inspection of the quick air vent
Verify tightness of the quick air vent
If the quick air vent is not tight, it must be replaced
WARNING
HOT LIQUID
Water in heating systems is under high pressure and can have temperatures of
more than 100 °C.
•
When there is a malfunction of the product, take all necessary measures to
ensure that hot liquids do not pose any hazard to persons.
Failure to follow these instructions can result in death, serious injury or
equipment damage.
