20
Commissioning
EN
DTA 20 E
4. Screw the connection piece (A) into the hole.
If the plastic flange does not have a hole, proceed as follows:
1. Dismount the plastic flange.
2. Drill a vertical hole Ø 10 mm through the plastic flange.
3. Remount the plastic flange.
4. Push the weight (C) and the hose (C) through the hole.
5. Screw the connection piece (A) into the hole.
6
Commissioning
6.1
Commissioning the product
Verify that all prerequisites for operation of the product are met.
Verify that the power supply is on for operation with the power supply unit.
Initial switching on:
1. Press the lower key to switch on
the product.
- The product automatically starts
a measurement.
- The display shows the lan-
guages selection (see "Selecting
the language").
2. Press the upper or the lower key
to set the required language.
3. Press the centre key 1 x.
- The selected language is set
and the display changes to the
next menu setting.
Summary of Contents for DTA 20 E
