17
Mounting
EN
DTA 20 E
5.4
Mounting the measuring line to the tank
NOTICE
INCORRECT MEASUREMENT RESULTS
•
Verify that the measuring line is not bent or damaged.
Failure to follow these instructions can result in equipment damage.
1. Select the threaded adapter
(screw connector kit) suitable for
the tank connection.
A. Screw connector for holding the
measuring line
B. Connection thread (G½ and G1)
C. Threaded adapter (G1 to G1½)
D. Threaded adapter (G1½ to G2)
E. Bottom part
1. Lower the bottom part (H) to the
bottom of the tank.
2. Tighten the screw connection (F)
so that the measuring line can no
longer be moved.
3. Use the enclosed nail cable clips
to fasten the measuring line (G), if
necessary.
A
B
C
D
E
H
F
G
Summary of Contents for DTA 20 E
