17
Commissioning
EN
DA 10/12/14
6
Commissioning
6.1
Commissioning the product
Verify that the product has been properly mounted and electrically con-
nected.
WARNING
UNINTENDED EQUIPMENT OPERATION
When the product is commissioned for the first time, the factory settings of the
product may cause switching of the outputs. This may result in unintended oper-
ation of connected equipment if the outputs are already wired when the product
is commissioned, for example, unintended starting of pumps or other system
components.
•
Only wire the analogue outputs and the relay outputs after you have
parameterised the product and after you have verified by means of a test
of the parameterisation that the system components to be connected
cannot cause hazards.
•
Before wiring the analogue outputs and the relay outputs, verify that
applying the supply voltage cannot cause unintended operation of con-
nected equipment.
Failure to follow these instructions can result in death, serious injury or
equipment damage.
Summary of Contents for 31281
