Mounting and commissioning
Unimes E
11
6
Mounting and commissioning
6.1 Determining
the tank data
Before Unimes E can be installed, you must determine the tank data.
For safety reasons and to facilitate subsequent checks, you should
document the tank data on this page.
Tank shape
Determine the tank shape code using the table below.
Example for linear indication: tank shape code 1.
Tank shape
code
Tank shape
Description
1
Linear tank
Rectangular tanks, upright cylin-
ders, steel tanks welded in the
basement and all other linear
measuring applications
2
Cylindrical tank
Vertically mounted cylinders
3
Ball-shaped tank Tanks with the shape of a ball
4
Plastic battery
type tank
Plastic battery type tanks with
straps or bulges
5
Oval tank
Oval basement tanks, e.g. glass-
fibre re-enforced tanks or sheet
metal tanks
6
Plastic tank with
recess
Plastic tanks with larger recesses
in the tank centre (manufacturers:
e.g. Roth, Werit)
Determined tank shape code:
Tank volume
Determine the total volume of the tank facility.
Determined tank volume:
litres
Tank height (max. liquid level)
Determine tank height.
Determined tank height:
mm
Current liquid level
Determine the current liquid level as accurately as possible.
Determined liquid level:
mm
