Installation
TankControl 01
15
6.
Route the cable of the submersible probe to the junction box
and connect the two cables using the enclosed terminal strip.
Only connect identical wire colours.
1
Control unit
2
White (U+)
3
Green (signal)
4
Brown (U-)
5
Yellow-black/yellow-green (shield)
6
Terminal strip
7
Submersible probe
Fig. 4: Cable connection control unit and submersible probe
7.
A transparent hose sticks out from the cable end of the sub-
mersible probe. This hose supplies the pressure sensor with
atmospheric pressure; it must not be closed or bent.
Do not completely close the junction box in order to prevent in-
correct measurements.
8.
Connect the unit electrically as described in chapter 6.1 on
page 16.
9.
Connect the control unit.